STANLEY HYDRAULIC TOOLS
POWER UNITS
HP28 DUAL CURCUIT (2) 8GPM - The HP28 (TWIN8) twin circuit hydraulic power unit offers a revolutionary design capable of operating two tools at 8 gpm simultaneously. For the first time running two hydraulic tools at full 8 gpm capacity is a reality, increasing productivity and versatility like never before. Experience how the HP28 will change the way hydraulic tools are used and JOIN THE REVOLUTION! Each of the two circuits is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools.
GT18 - The GT18 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The GT18 features a computerized all-electric throttle control system that idles-down the engine when tools aren't running, saving fuel and extending service life. Its feature-rich, dependable operation make the GT18 the workhorse of the industry.
GTR20B02 - The GTR20 is a small compact hydraulic power unit designed to provide power for hydraulic tools requiring 5 gpm/20 lpm up to 10 gpm/40 lpm. The GTR20 is powered by a choice of Briggs & Stratton or Honda industrial grade engines. Folding and locking handle, electric start, computer throttle control, pressurized engine lubrication, and large pneumatic tires are standard equipment.
TRACHORSE -The TracHorse is an all-terrain, self-propelled mobile hydraulic power pack that allows transportation of tools and equipment in most job site environments. Straightforward operating controls allow for maneuvering in a wide range of applications. The auxiliary hydraulic tool circuit is designed for continuous-duty applications and features the standard high-efficiency cooling found on all Stanley hydraulic power units.
BREAKERS HANDHELD AND MOUNTED
GT23 - The GT23 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 2 and Type 3 hydraulic tools. Its powerful 23 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The GT23 features a computerized all-electric throttle control system that idles-down the engine when tools aren't running, saving fuel and extending service life. Its feature-rich, dependable operation make the GT23 the industry choice for high-flow applications.
HAND AND FOOT PUMPS
WATER PUMPS
HYDRAULIC BREAKERS
HANDHELD BREAKERS -
MOUNTED BREAKERS
MB05 - The new MB05 is designed for years of dependable service. The wide flow range let’s you go from your skid steer to mini excavator with ease. The skid steer bracker has four positions to allow you to tackle floors and walls.
MB SERIES - Mounted Carrier Attachments - Lightweight, extremely powerful breakers -Minimal moving parts, only two for less maintenance, better performance and less service. Superior valve design for operation within a broader range of pressures and flows with less heat and stress on components...
CUTTING
CHAIN SAWS
CONCRETE - DS11 - Diamond Chain Saw - The Stanley Diamond Chain Saw brings new technology to the concrete cutting industry. Using segments impregnated with diamond and laser welded to the saw’s chain, you can cut concrete (including wire or rebar reinforced), brick,concrete block, masonry or stone.
PIPE - Utility Chain Saw - DS12 - Stanley Hydraulic Tools Chain Saw for cutting ductile iron pipe and more.Stanley’s utility chain saw is a revolutionary cutting method designed to change the way the job gets done. From ductile iron to plastic pipe, this chain saw will get you in and out of the job faster, easier and safer than other methods.
WOOD - Diamond Chain Saw CS05-CS06 - Highest power to weight ratio of any chain saw on the market. All models feature interlocking triggers, hand guards, low kick back bars and chains. No chain coasting when you release the trigger. Kickback is also reduced without the centrifugal force from the fly wheel used on gas driven saws. Ideal for bucket truck use because of their wide range of flow and pressure requirements.
CUT-OFF SAW - CO25 - Lightweight and powerful, the Stanley CO25 Cutoff Saw is ideal for cutting concrete, masonry, pipe, structural steel beams and guardrail. The CO25 multi-hand position cast aluminum handle with interlocking safety trigger provides ergonomic gripat a variety of tool angles for reduced operator fatigue.
PRUNER -941 HYDRAULIC PRUNER
CIRCULAR SAW -
GRINDERS
FENCING TOOLS - POST DRIVER - PULLER AND AUGER
DRILLS
TAMPERS - RAMMERS - COMPACTORS
UNDERWATER HYDRAULIC TOOLS
HGL80, HGL81 and HGL61
12% weight reduction over the HG80 providing the industry’s lightest hydraulic hand held grinders. High performance hydraulic motors providing industry leading grinding speed and power. Redesigned handle eliminates the hydraulic oil from the handle, improves tool balance and user comfort...
The Stanley PD45 Post Driver is a heavy duty tool for driving a wide range of posts including #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts. Ideal for for DOT applications to drive break way post to within 4 inches above ground level. Features: 7-9 gpm (26-34 lpm) operating flow., Lifting eye. ON/OFF trigger next to guide handle (model dependent). Hose whips. Nitrogen charged accumulator. Guide handles
The PP10 is designed to remove flanged type sign posts and irregularly shaped posts up to 8 in. / 20 cm wide. It features an 8 inch / 203 cm stroke and pulling force of 9800 lbs / 4450 kg. The PP10 uses two methods to solve post pulling problems. For flanged posts, gripper jaws grasp the flange and for irregular posts, a chain is used. Pins on the end of the chain may be inserted into holes in perforated posts to keep the chain from sliding. The PP10 is furnished with gripper jaws, chain with pins,
EA08 - Earth Auger
The Stanley EA08 Earth Auger is used for a wide variety of earth boring application. The EA08 can be operated with two people or by one person using the torque tube. Features: Output torque 250 ft. lb. / 339 Nm, Reversible, Torque tube for one-man operation.Dead-man type ON/OFF control.
Stanley’s CH18 Chipping Hammer, with “D” handle, is a light but powerful alternative to the air powered tools. Both the handle and tool holder end are shock and heat insulated for operator comfort.
The CH15 Chipping Hammer is a light but powerful alternative to air powered tools. Designed for medium to heavy-duty jobs, the CH15’s high power-to-weight ratio makes it the ideal tool for light concrete breaking jobs and for chipping concrete or steel. The compact size and balance of the tool makes it easy to use in confined, hard-to-reach locations.
Digger DR19 - is compact and easy to handle in a trench. Its high blow frequency and power makes short work of heavy clay and other material such as light shale.
BREAKERS - IMPACTS - SAWS - DRILLS - GRINDERS - CHIPPING HAMMERS
IW16 Impact Wrench - Medium to heavy duty wrench ideal for nut and bolt driving, anchor bolts and drilling applications. Designed to run from a wide range of hydraulic circuits, the IW16 has adjustable impact intensity making it ideal for a wide range of heavy duty driving. The large “D” handle and feathering trigger is convenient and gives the operator complete control of the wrench. Just set the direction of rotation to either tighten or loosen a fastener, squeeze the trigger for up to 2500 ft lbs (3400 Nm) of torque. Standard reversing valve provides instant change over from forward to reverse.
The TA54 Tamper - The TA54 Tamper is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600
blows per minute with a long 2-1/2 inch stroke for optimum compaction...
The CS11 CHAIN SAW - is an extreme duty hydraulic powered chain saw for cutting all types of wood structures underwater - including bridge pilings, pier and dock timbers. It‘s robust design and high torque gear motor provides divers instant chain speed to cut through the toughest timbers with ease. The power to weight ratio is significantly higher than any other wood cutting chain saw and is available with bar lengths up to 42" (107 cm). Painted hi‑visibility yellow.
HD45 - UNDERWATER HAMMER DRILL - is a heavy duty underwater model designed for drilling in concrete, rock and masonry. The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2" diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts.Painted hi-visibility yellow.
CH15 / CH18 - UNDERWATER CHIPPING HAMMERS
The CH15 underwater chipping hammer is compact chipper for light scaling in underwater application. The floating trigger design requires minimal pressure across any part of its surface to engage the tool, allowing for simple operation. Operates in any position High power to weight ratio Lightweight at 16 lbs. Rubber coating on tool body for diver comfort
The CH18 underwater chipping hammer is designed for medium duty underwater chipping of concrete, masonry and rock. The ergonomic D handle with inside trigger prevents accidental operation. High power to weight ratio. Operates in any position. Handle is Plastisol coated for diver comfort. Stainless steel spool and fasteners
UNDERWATER IMPACT WENCHES - IW12 / IW16 / IW24 - Stanley Hydraulic Impact Wrenches for underwater use are designed for the toughest underwater bolting applications. The rugged design incorporates an integral motor and heavy-duty mechanism for the rigors of track maintenance use. The power-to-weight ratio of these products is un-matched by any impact wrench on the market in their class. See PDF Spec Sheets below:
PHM 700 Hydraulic Hand Operated Pump - The PHM700 hand-operated hydraulic pump develops a max. pressure force of 700 bar, and thanks to its 2 speeds hydraulic system, allows a quick pressure supply. Connection to all types of 700 bar hydraulic heads (see data sheets for connecting accessories). Automatic release when force of 700 Bar is reached. Ram retract mechanism actuated by release trigger. Hook
to hold the pump in stop position.
PHP 700Hydraulic Foot Operated Pump - Hydraulic foot operated double speed pump, developping a maximum pressure of 700 Bar. Connection to all types of 700 Bar hydraulic heads. (See data sheets for connecting accessories). This new foot-operated pump is more compact for a better ergonomics. Its design, standardized to the hand pump is sturdier. Automatic release when force of 700 Bar is reached. Ram retract mechanism actuated by release trigger. Hook to hold the pump in stop position.
SM 50 - Spec Sheet
Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
SM20 - Spec Sheet
SM21 - Spec Sheet
CR27 - circular saw is ideal for use by right-of-way crews, utilities, parks departments and grounds keepers. Blade Brake reduces blade coast time to 2.5 - 5.0 seconds compared to 15seconds or more for tools without blade brakes.
IMPACTS WRENCHES and HYDRANT SAVER
The IW12 Impact Wrench - adjustable impact intensity. The IW12 can handle a wide variety of applications. The rugged Stanley impact wrench mechanism is simple to maintain and has many features to give it proven reliability. Torque transmission to the operator is minimal with the swing hammer design. The larger feathering trigger is convenient to use and gives the operator complete control of the wrench. The standard reversing valve provides instant reverse. For operator comfort the IW12 handles coated with a heat insulating, shock absorbing material.
The Stanley IW24 Impact Wrench is a heavy duty wrench ideal for nut and bolt driving, screw anchor and other heavy impact applications. Designed to run from a wide range of hydraulic circuits, the IW24 has adjustable impact intensity making it ideal for a wide range of heavy duty driving.
ELECTRIC BREAKER
BRE60111 - SHOCKS - Active Vibration Control® reduces vibration felt by the operator at the handles - A perform and protect feature - 38 ft. lb. of impact energy provides maximum performance, 15 amp motor provides maximum power and overload protection, Rubber coated handles provide greater comfort and control, Electronic soft start increases productivity by reducing bit walking, Hammer cart provides easy transport of pavement breaker
Trash Pump is a light-weight, heavy duty pump capable of pumping high volumes of water, sand, slurries, gravel, sludge and solids up to 3 in/75 mm in diameter. The TP08 is a submersible, self priming and can run dry without damage to the motor, bearings or impeller.
The StanleyTP03 Trash Pump is the lightest, most efficient way to move large volumes of liquid with concentrations of solids up to 25% by volume.
PR41 - Heavy-duty Cutting Power is available right from your tree trimming vehicle or bucket truck with the Stanley Hydraulic Tools PR41 Pruner. Lightweight Head Design provides ease of handling for increased operator comfort. Full Power on both opening and closing cycles of the PR41 cutting blade make the tool fast and safe to operate.
CHIPPING HAMMERS and DIGGERS
10 MODELS OF TOOLS AVAILABLE
HYDRANT SAVER - Hydrant seat removed in less than 5 minutes! Safe and effective method without reconstruction. SIMPLE: Easy to use, turning a once-difficult application into a routine operation. COST EFFECTIVE: Pays for itself in the cost of replacing 2-3 hydrants. ENVIRONMENTALLY FRIENDLY: By extending the life of a hydrant and not
scrapping difficult-to-recycle materials
The Stanley HD01 Hammer Drill is ideal for just about any drilling job whether in rock, concrete, masonry, wood or metal. The powerful, high rate, hammer function makes it easy to drill in rock, masonry and other like materials. For drilling in materials such as wood and metal, the hammer function can be turned off...
Stanley Hydraulic Tool’s HD45 Hammer Drill is a heavy duty model designed for use in medium to heavy applications. It’s the ideal tool for drilling gas and water utility holes and setting anchor bolts. Drills Holes from 3/4 in (19 mm) to 2 in (50 mm) in diameter and up to 29 in (73.7 cm) deep as well as core drilling up to 4 in (102 mm) in diameter.
The Stanley SK47 Sinker Drill is designed for utility construction, blast hole drilling, leak detection for gas utilities and dowel drilling. The SK47 comes ready to use air flushing to clear holes of debris. The air flow automatically is shut off when the drill is Off.
The Stanley SK58 Sinker Drill is designed for heavy-duty utility construction, blast hole drilling,leak detection for gas utilities, dowel drilling.The sinker drill features an easy start feathering trigger and a direct drive rotation motor for reliable service and fast and easy starting. A model is available for underwater use. Models are available with air or water flushing to clear holes of debris.
DL07 Drill - is ideal for drilling holes in wood, metal and masonry. Instant reverse for high reliability and efficiency in all types of drilling applications. Dual-position Assist Handle on some models provides increased control and performance on tough drilling jobs. The new over-sized reversing spool is protected by heavy-duty wiper seals. These wiper seals clean away dirt as the spool is moved.
The ID07 Impact Drill - can drive wood augers into the hardest salt cured or creosote-treated poles. Delivering impact torque of up to 500 ft. lbs. The ID07 has the work-site proven swing-hammer mechanism that will deliver high performance and long-term service. The integral Stanley HyrevzTM gear motor is manufactured to exacting standards to deliver maximum efficiency. The built-in reverse-check valve prevents operating the wrench when reverse- plumbed to the hydraulic system. Preventing reverse operation ensures a long operating life for the hydraulic seals. Setting the tool for open- or closed-center operation is as simpleas opening or closing a valve.
